The GHD curling iron is a beloved tool for achieving those coveted salon-worthy curls. However, every now and then, you might encounter a flashing red light on your device, leaving you wondering, “Why is my GHD curling iron flashing red?” This blinking red light isn’t just an aesthetic quirk; it’s a signal that something needs your attention.
This blog post will delve into the common reasons behind this flashing red light, providing you with clear explanations and troubleshooting steps to get your GHD curling iron back in action.
Understanding the Flashing Red Light
The flashing red light on your GHD curling iron is a built-in safety feature designed to protect both you and your device. It indicates that the curling iron is not functioning as it should and requires immediate attention.
Common Causes of the Flashing Red Light
There are several reasons why your GHD curling iron might be flashing red. Let’s explore the most common culprits:
1. Overheating Protection
One of the primary functions of the flashing red light is to signal overheating. GHD curling irons are equipped with advanced safety features that prevent them from reaching dangerously high temperatures. If the device senses that it’s getting too hot, it will automatically shut off and flash red to indicate that it needs to cool down.
Troubleshooting:
- Allow the curling iron to cool down completely. This usually takes around 30 minutes.
- Check the power cord and ensure it’s properly plugged in. A loose connection can sometimes cause overheating.
- Avoid blocking the ventilation holes on the curling iron. These holes are crucial for heat dissipation.
2. Power Issues
Another common reason for a flashing red light is a power issue. This could stem from a faulty power outlet, a damaged power cord, or even a power surge.
Troubleshooting:
- Try plugging your curling iron into a different outlet. This helps determine if the problem is with the outlet or the device itself.
- Inspect the power cord for any visible damage. Look for frayed wires or broken connections.
- If the power cord is damaged, replace it immediately. Using a damaged power cord can be dangerous.
3. Faulty Internal Components
In some cases, the flashing red light might indicate a problem with the internal components of your GHD curling iron. This could be due to a malfunctioning heating element, a faulty temperature sensor, or a problem with the control board.
Troubleshooting:
- Contact GHD customer support. If you suspect a faulty internal component, it’s best to seek professional assistance.
How to Reset Your GHD Curling Iron
If you’ve tried the basic troubleshooting steps and your GHD curling iron is still flashing red, you might need to reset it. Here’s how:
1. Unplug the curling iron from the power outlet.
2. Wait for at least 30 seconds.
3. Plug the curling iron back into the power outlet.
4. Turn the curling iron on.
If the flashing red light persists after a reset, it’s time to consult GHD‘s customer support.
Preventing Future Issues
To minimize the chances of encountering the flashing red light again, consider these preventative measures:
- Always unplug your GHD curling iron when not in use. This prevents overheating and reduces the risk of accidents.
- Avoid using the curling iron on wet hair. Wet hair can cause steam and potentially damage the device.
- Clean your GHD curling iron regularly. This helps to remove any product buildup that could affect its performance.
- Store your curling iron in a cool, dry place. Avoid storing it in direct sunlight or in areas with high humidity.
What to Do If Your GHD Curling Iron Is Still Flashing Red
If you’ve tried all of the troubleshooting steps and your GHD curling iron is still flashing red, it’s time to contact GHD customer support. They can help you determine the cause of the problem and provide you with the best course of action.
Time to Say Goodbye?
In some cases, the flashing red light might be an indication that your GHD curling iron is beyond repair. If you’ve tried all of the troubleshooting steps and the problem persists, it might be time to consider purchasing a new device.
However, before you throw in the towel, remember that GHD offers a generous warranty on their products. If your curling iron is still under warranty, you may be able to get it repaired or replaced for free.
Final Thoughts: Keep Your GHD Curling Iron Healthy
The flashing red light on your GHD curling iron might seem alarming, but it’s usually a sign that something simple needs to be addressed. By understanding the common causes and troubleshooting steps, you can quickly get your curling iron back in action and continue creating those beautiful curls. Remember to follow the preventative measures outlined in this post to keep your GHD curling iron healthy and functioning optimally for years to come.
Frequently Discussed Topics
Q: How long should I wait for my GHD curling iron to cool down before using it again?
A: It’s best to wait at least 30 minutes for your GHD curling iron to cool down completely before using it again. This ensures that the internal components have had enough time to cool down and prevents potential damage.
Q: Can I use a hairdryer to cool down my GHD curling iron faster?
A: No, it’s not recommended to use a hairdryer to cool down your GHD curling iron. The sudden change in temperature can potentially damage the internal components.
Q: What should I do if I see a spark coming from my GHD curling iron?
A: If you see a spark coming from your GHD curling iron, immediately unplug it from the power outlet and do not attempt to use it again. This could be a sign of a serious electrical fault. Contact GHD customer support for assistance.
Q: Is it safe to use my GHD curling iron if the power cord is damaged?
A: No, it is not safe to use your GHD curling iron if the power cord is damaged. A damaged power cord can be dangerous and could potentially cause electrical shocks or fires. Replace the power cord immediately.